Online Broadcom NetXtreme & NetXtreme II Firmware Update Utility for Linux
Online update for IBM servers and options.

(c) Copyright Broadcom Corporation 2000, 2011. All rights reserved.


(C) Copyright International Business Machines Corporation 1999, 2010. All
rights reserved. US Government Users Restricted Rights - Use, duplication,
or disclosure restricted by GSA ADP Schedule Contract with IBM Corp.

Note: Before using this information and the product it supports, read the
general information in "Notices and trademarks” in this document.



1.0 Overview

      This update package contains firmware updates for IBM eServer xSeries,
      Intellistation and options that use integrated Broadcom ethernet adapters.
      For a complete list of IBM products supported by this package, please
      refer to the change history file.

1.1 Limitations

      
1.2 Level recommendation and prerequisites for the update

      a. The NetXtreme firmware update for Linux requires a tg3 driver at level 3.58b 
         or higher installed in the system.
      b. The NetXtreme II firmware update for Linux requires a bnx2 driver at level 1.6.6b 
         or higher installed in the system.
      c. Ethernet ports need to be up for the firmware update to happen and 
         "each port" should be configured with an ip address.
      d. libstdc++.so.5 and/or libstdc++.so.6 needs to be installed in the 
         system(compat-libstdc++-33-<version>.<architecture>.rpm provides that library).
      e. For Rhel3, the kernel version should be 2.4.24 or higher, for the update 
         to function properly.
      f. VMware supported versions are ESX 3.5u5 (or later) and ESX 4.0 (or later).

      Note:If any of the prerequisites are not met, the Broadcom firmware update 
      process will indicate a  failure. To ensure that all of your Broadcom Ethernet 
      adapters are updated to the latest firmware, please satisfy all prerequisites 
      before running the Broadcom firmware update.
     
1.3 Dependencies


     
2.0 Installation and setup instructions for Linux

      Linux update is packaged as a binary,which allows the user to 
      upgrade the firmware silently  
      
      Use the command 
      ./brcm_fw_nic_<version>_linux_32-64.bin -s


      The firmware update tool will only update the firmware if the existing level is less than
      the level in the package. To override the version check, run the firmware update as follows:
      
         ./brcm_fw_nic_<version>_linux_32-64.bin -force



3.0 Configuration information

      For a complete list of IBM products supported by this package, please
      refer to the change history file.
      
	  Please check the downloads section for your adapter model at www.qlogic.com 
 	  or your OEM downloads site for a list of compatible  operating systems.


3.1 Define configuration settings

3.2 Hardware status and information



4.0 Web information and support phone numbers

      IBM Support Web Site:
      http://www.ibm.com/support

      If you have any questions about this update, or problems
      applying the update go to the following Help Center web site
      http://www.ibm.com/planetwide/ for world wide contact information.



5.0 Notices and trademarks

      The following terms are trademarks of the IBM Corporation in the 
      United States or other countries or both:

      IBM
      eserver
      xSeries

      Broadcom is a registered trademark of Broadcom Corporation.

      Other company, product, and service names may be trademarks or service 
      marks of others.


6.0 Disclaimer

      THIS DOCUMENT IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND.  IBM 
      DISCLAIMS ALL WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING WITHOUT 
      LIMITATION, THE IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE 
      AND MERCHANTABILITY WITH RESPECT TO THE INFORMATION IN THIS DOCUMENT.  
      BY FURNISHING THIS DOCUMENT, IBM GRANTS NO LICENSES TO ANY PATENTS OR 
      COPYRIGHTS.